In the vacuum state, place the workpiece on the cathode of low-pressure glow discharge and inject appropriate gas. At a certain temperature, a coating is obtained on the surface of the workpiece by using the ionization polymerization process combining chemical reaction and plasma, while the gaseous substances are absorbed on the surface of the workpiece and react with each other, and finally a solid film is formed and deposited on the surface of the workpiece.
Characteristic:
1. Low temperature film forming, the temperature has little impact on the workpiece, avoiding the coarse grain of high-temperature film forming, and the film layer is not easy to fall off.
2. It can be coated with thick film, which has uniform composition, good barrier effect, compactness, small internal stress and is not easy to produce micro-cracks.
3. The plasma work has a cleaning effect, which increases the adhesion of the film.
The equipment is mainly used for coating SiOx high resistance barrier on PET, PA, PP and other film materials. It has been widely used in medical / pharmaceutical products packaging, electronic components and food packaging, as well as packaging containers for beverages, fatty foods and edible oils. The film has excellent barrier property, environmental adaptability, high microwave permeability and transparency, and is hardly affected by environmental humidity and temperature changes. It solves the problem that traditional packaging materials may bring about health effects.
Optional models | Equipment size ( width ) |
RBW1250 | 1250(mm) |
This coating equipment integrates magnetron sputtering and ion coating technology, providing a solution for improving color consistency, deposition rate and stability of compound composition. Accor...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The CF1914 equipment is equipped with medium frequency magnetron sputtering coating system + anode layer ion source + SPEEDFLO closed-loop control + crystal control monitoring system. The medium fr...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
This coating equipment integrates magnetron sputtering and ion coating technology, providing a solution for improving color consistency, deposition rate and stability of compound composition. Accor...
This series of equipment converts the coating materials with low melting point and easy to evaporate into nano particles by heating in the medium frequency induction furnace or evaporation molybden...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
With the rapid growth of the market demand for improving the wear resistance, lubrication, corrosion resistance and other properties of hard coatings, cathodic arc magnetic filtration ion coating e...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The equipment is equipped with magnetron sputtering coating system + anti fingerprint coating system + SPEEDFLO closed-loop control. The equipment adopts medium frequency magnetron sputtering techn...
The anti fingerprint coating equipment adopts the magnetic control coating AF anti fingerprint technology, and the anti fingerprint water drop angle can reach more than 115 °. The film has good hyd...
In the vacuum chamber, the coating material is vaporized and deposited on the substrate by using the resistance heating method, so that the surface of the substrate can obtain metal texture and ach...
The equipment adopts cathode arc ion coating technology and is equipped with advanced IET etching system. After treatment, the product can directly deposit hard coating without transition layer. At...
The equipment integrates magnetron sputtering and ion coating technology, and provides a solution to improve color consistency, deposition rate and stability of compound composition with unique whe...
The large-scale anti fingerprint coating equipment for high-end sanitary ware is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerpr...
Magnetron winding coating equipment is to use magnetron sputtering method to change the coating material into gaseous or ionic state in the vacuum environment, and then deposit it on the work-piece...
With the rapid growth of the market demand for improving the wear resistance, lubrication, corrosion resistance and other properties of hard coatings, cathodic arc magnetic filtration ion coating e...
Magnetron winding coating equipment is to use magnetron sputtering method to change the coating material into gaseous or ionic state in the vacuum environment, and then deposit it on the work-piece...
With the rapid growth of the market demand for improving the wear resistance, lubrication, corrosion resistance and other properties of hard coatings, cathodic arc magnetic filtration ion coating e...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The equipment is equipped with magnetron sputtering coating system + anti fingerprint coating system + SPEEDFLO closed-loop control. The equipment adopts medium frequency magnetron sputtering techn...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
In the vacuum chamber, the coating material is vaporized and deposited on the substrate by using the resistance heating method, so that the surface of the substrate can obtain metal texture and ach...
The equipment integrates magnetron sputtering and resistance evaporation technology, and provides a solution for coating a variety of different substrates. The experimental coating equipment is mai...
The equipment integrates magnetron sputtering and ion coating technology, and provides a solution for improving color consistency, deposition rate and stability of compound composition. According t...
The equipment adopts cathode arc ion coating technology and is equipped with advanced IET etching system. After treatment, the product can directly deposit hard coating without transition layer. At...
The lamp protective film equipment developed by ZHENHUA solves the long-standing problem that PC / ABS lamps need to be sprayed with paint. It allows the injection molded parts of the lamps to dire...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The coating line adopts modular structure, which can increase the chamber according to the process and efficiency requirements, and can be coated on both sides, which is flexible and convenient. Eq...
The large-scale anti fingerprint coating equipment for high-end sanitary ware is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerpr...
Magnetron winding coating equipment is to use magnetron sputtering method to change the coating material into gaseous or ionic state in the vacuum environment, and then deposit it on the work-piece...
In the vacuum chamber, the coating material is vaporized and deposited on the substrate by using the resistance heating method, so that the surface of the substrate can obtain metal texture and ach...
The equipment adopts the cathode arc evaporation ion coating technology, which has the characteristics of fast deposition rate, high energy and high metal ionization rate. The cathode arc can be co...
The lamp protective film equipment developed by ZHENHUA solves the long-standing problem that PC / ABS lamps need to be sprayed with paint. It allows the injection molded parts of the lamps to dire...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
Optional models Vertical multifunctional coating production line Vertical decorative film coating production line
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The CF1914 equipment is equipped with medium frequency magnetron sputtering coating system + anode layer ion source + SPEEDFLO closed-loop control + crystal control monitoring system. The medium fr...
With the national attention to industrial environmental protection, the water electroplating process is gradually abandoned. At the same time, with the rapid growth of demand in the automotive indu...
The CF1914 equipment is equipped with medium frequency magnetron sputtering coating system + anode layer ion source + SPEEDFLO closed-loop control + crystal control monitoring system. The medium fr...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The equipment is a vertical double door structure. It is a composite equipment integrating DC magnetron sputtering coating technology, resistance evaporation coating technology, CVD coating technol...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The anti fingerprint coating equipment adopts the magnetic control coating AF anti fingerprint technology, and the anti fingerprint water drop angle can reach more than 115 °. The film has good hyd...
The large-scale anti fingerprint coating equipment for high-end sanitary ware is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerpr...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
As the current market has higher and higher requirements for the wearability of jewelry, the company has launched special protective film equipment for the jewelry industry. The equipment adopts CV...
The equipment integrates magnetron sputtering and ion coating technology, and provides a solution to improve color consistency, deposition rate and stability of compound composition with unique whe...
The equipment integrates magnetron sputtering and resistance evaporation technology, and provides a solution for coating a variety of different substrates. The experimental coating equipment is mai...
ITO / ISI horizontal continuous coating production line is a large planar magnetron sputtering continuous production equipment, which adopts modular design to facilitate future expansion and upgrad...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
This series of equipment converts the coating materials with low melting point and easy to evaporate into nano particles by heating in the medium frequency induction furnace or evaporation molybden...
The lamp protective film equipment developed by ZHENHUA solves the long-standing problem that PC / ABS lamps need to be sprayed with paint. It allows the injection molded parts of the lamps to dire...
The equipment integrates magnetron sputtering and resistance evaporation technology, and provides a solution for coating a variety of different substrates. The experimental coating equipment is mai...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
With the rapid growth of the market demand for improving the wear resistance, lubrication, corrosion resistance and other properties of hard coatings, cathodic arc magnetic filtration ion coating e...
The coating line adopts modular structure, which can increase the chamber according to the process and efficiency requirements, and can be coated on both sides, which is flexible and convenient. Eq...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
The large horizontal magnetron sputtering coating production line is a large planar magnetron sputtering continuous production equipment, which adopts modular design to facilitate future expansion ...
The equipment is equipped with magnetron sputtering coating system + anti fingerprint coating system + SPEEDFLO closed-loop control. The equipment adopts medium frequency magnetron sputtering techn...
The equipment is a vertical double door structure. It is a composite equipment integrating DC magnetron sputtering coating technology, resistance evaporation coating technology, CVD coating technol...
In the vacuum state, place the workpiece on the cathode of low-pressure glow discharge and inject appropriate gas. At a certain temperature, a coating is obtained on the surface of the workpiece by...
In the vacuum chamber, the coating material is vaporized and deposited on the substrate by using the resistance heating method, so that the surface of the substrate can obtain metal texture and ach...
As the current market has higher and higher requirements for the wearability of jewelry, the company has launched special protective film equipment for the jewelry industry. The equipment adopts CV...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The lamp protective film equipment developed by ZHENHUA solves the long-standing problem that PC / ABS lamps need to be sprayed with paint. It allows the injection molded parts of the lamps to dire...
As the current market has higher and higher requirements for the wearability of jewelry, the company has launched special protective film equipment for the jewelry industry. The equipment adopts CV...
With the rapid growth of mobile phone industry demand, the loading capacity of traditional optical coating machine can not meet this demand. ZHENHUA has launched magnetron sputtering optical coatin...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
The lamp protective film equipment developed by ZHENHUA solves the long-standing problem that PC / ABS lamps need to be sprayed with paint. It allows the injection molded parts of the lamps to dire...