This series of equipment uses magnetron targets to convert coating materials into nanometer sized particles, which are deposited on the surface of substrates to form thin films. The rolled film is placed in the vacuum chamber. Through the electrically driven winding structure, one end receives the film and the other puts the film. It continues to pass through the target area and receives the target particles to form a dense film.
Characteristic:
1. Low temperature film forming. The temperature has little effect on the film and will not produce deformation. It is suitable for PET, PI and other base material coil films.
2. The film thickness can be designed. Thin or thick coatings can be designed and deposited by process adjustment.
3. Multiple target location design, flexible process. The whole machine can be equipped with eight targets, which can be used as either simple metal targets or compound and oxide targets. It can be used to prepare single-layer films with single structure or multi-layer films with composite structure. The process is very flexible.
The equipment can prepare electromagnetic shielding film, flexible circuit board coating, various dielectric films, multi-layer AR antireflection film, HR high antireflection film, color film, etc. the equipment has a very wide range of applications, and single-layer film deposition can be completed by one-time film deposition.
The equipment can adopt simple metal targets such as Al, Cr, Cu, Fe, Ni, SUS, TiAl, etc., or compound targets such as SiO2, Si3N4, Al2O3, SnO2, ZnO, Ta2O5, ITO, AZO, etc.
The equipment is small in size, compact in structure design, small in floor area, low in energy consumption, and flexible in adjustment. It is very suitable for process research and development or small batch mass production.
RCW350 | RCW600 |
Width 350(mm) | Width 600(mm) |
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
With the national attention to industrial environmental protection, the water electroplating process is gradually abandoned. At the same time, with the rapid growth of demand in the automotive indu...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The equipment integrates magnetron sputtering and ion coating technology, and provides a solution for improving color consistency, deposition rate and stability of compound composition. According t...
ITO / ISI horizontal continuous coating production line is a large planar magnetron sputtering continuous production equipment, which adopts modular design to facilitate future expansion and upgrad...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The equipment is a vertical double door structure. It is a composite equipment integrating DC magnetron sputtering coating technology, resistance evaporation coating technology, CVD coating technol...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
In the vacuum chamber, the coating material is vaporized and deposited on the substrate by using the resistance heating method, so that the surface of the substrate can obtain metal texture and ach...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
With the rapid growth of mobile phone industry demand, the loading capacity of traditional optical coating machine can not meet this demand. ZHENHUA has launched magnetron sputtering optical coatin...
The large-scale anti fingerprint coating equipment for high-end sanitary ware is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerpr...
The CF1914 equipment is equipped with medium frequency magnetron sputtering coating system + anode layer ion source + SPEEDFLO closed-loop control + crystal control monitoring system. The medium fr...
ITO / ISI horizontal continuous coating production line is a large planar magnetron sputtering continuous production equipment, which adopts modular design to facilitate future expansion and upgrad...
The equipment adopts the cathode arc evaporation ion coating technology, which has the characteristics of fast deposition rate, high energy and high metal ionization rate. The cathode arc can be co...
Magnetron winding coating equipment is to use magnetron sputtering method to change the coating material into gaseous or ionic state in the vacuum environment, and then deposit it on the work-piece...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
This series of equipment converts the coating materials with low melting point and easy to evaporate into nano particles by heating in the medium frequency induction furnace or evaporation molybden...
With the rapid growth of the market demand for improving the wear resistance, lubrication, corrosion resistance and other properties of hard coatings, cathodic arc magnetic filtration ion coating e...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The CF1914 equipment is equipped with medium frequency magnetron sputtering coating system + anode layer ion source + SPEEDFLO closed-loop control + crystal control monitoring system. The medium fr...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
ITO / ISI horizontal continuous coating production line is a large planar magnetron sputtering continuous production equipment, which adopts modular design to facilitate future expansion and upgrad...
With the rapid growth of the market demand for improving the wear resistance, lubrication, corrosion resistance and other properties of hard coatings, cathodic arc magnetic filtration ion coating e...
The lamp protective film equipment developed by ZHENHUA solves the long-standing problem that PC / ABS lamps need to be sprayed with paint. It allows the injection molded parts of the lamps to dire...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
ITO / ISI horizontal continuous coating production line is a large planar magnetron sputtering continuous production equipment, which adopts modular design to facilitate future expansion and upgrad...
The coating line adopts modular structure, which can increase the chamber according to the process and efficiency requirements, and can be coated on both sides, which is flexible and convenient. Eq...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The equipment adopts multi arc ion coating technology, which has the advantages of simple operation, fast pumping speed, high efficiency and good process repeatability. It is equipped with a double...
The large horizontal magnetron sputtering coating production line is a large planar magnetron sputtering continuous production equipment, which adopts modular design to facilitate future expansion ...
The lamp protective film equipment developed by ZHENHUA solves the long-standing problem that PC / ABS lamps need to be sprayed with paint. It allows the injection molded parts of the lamps to dire...
In the vacuum chamber, the coating material is vaporized and deposited on the substrate by using the resistance heating method, so that the surface of the substrate can obtain metal texture and ach...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The equipment adopts multi arc ion coating technology, which has the advantages of simple operation, fast pumping speed, high efficiency and good process repeatability. It is equipped with a double...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The equipment adopts multi arc ion coating technology, which has the advantages of simple operation, fast pumping speed, high efficiency and good process repeatability. It is equipped with a double...
Magnetron winding coating equipment is to use magnetron sputtering method to change the coating material into gaseous or ionic state in the vacuum environment, and then deposit it on the work-piece...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
In the vacuum state, place the workpiece on the cathode of low-pressure glow discharge and inject appropriate gas. At a certain temperature, a coating is obtained on the surface of the workpiece by...
The anti fingerprint coating equipment adopts the magnetic control coating AF anti fingerprint technology, and the anti fingerprint water drop angle can reach more than 115 °. The film has good hyd...
The equipment is equipped with magnetron sputtering coating system + anti fingerprint coating system + SPEEDFLO closed-loop control. The equipment adopts medium frequency magnetron sputtering techn...
The equipment integrates magnetron sputtering and resistance evaporation technology, and provides a solution for coating a variety of different substrates. The experimental coating equipment is mai...
The equipment integrates magnetron sputtering and ion coating technology, and provides a solution for improving color consistency, deposition rate and stability of compound composition. According t...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
The equipment is equipped with magnetron sputtering coating system + anti fingerprint coating system + SPEEDFLO closed-loop control. The equipment adopts medium frequency magnetron sputtering techn...
Optional models Vertical multifunctional coating production line Vertical decorative film coating production line
The large-scale anti fingerprint coating equipment for high-end sanitary ware is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerpr...
The large-scale anti fingerprint coating equipment for high-end sanitary ware is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerpr...
In the vacuum state, place the workpiece on the cathode of low-pressure glow discharge and inject appropriate gas. At a certain temperature, a coating is obtained on the surface of the workpiece by...
The anti fingerprint coating equipment adopts the magnetic control coating AF anti fingerprint technology, and the anti fingerprint water drop angle can reach more than 115 °. The film has good hyd...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
The equipment is equipped with magnetron sputtering coating system + anti fingerprint coating system + SPEEDFLO closed-loop control. The equipment adopts medium frequency magnetron sputtering techn...
The equipment is a vertical double door structure. It is a composite equipment integrating DC magnetron sputtering coating technology, resistance evaporation coating technology, CVD coating technol...
The large horizontal magnetron sputtering coating production line is a large planar magnetron sputtering continuous production equipment, which adopts modular design to facilitate future expansion ...
With the rapid growth of mobile phone industry demand, the loading capacity of traditional optical coating machine can not meet this demand. ZHENHUA has launched magnetron sputtering optical coatin...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The large horizontal magnetron sputtering coating production line is a large planar magnetron sputtering continuous production equipment, which adopts modular design to facilitate future expansion ...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
With the rapid growth of mobile phone industry demand, the loading capacity of traditional optical coating machine can not meet this demand. ZHENHUA has launched magnetron sputtering optical coatin...
The equipment is a vertical double door structure. It is a composite equipment integrating DC magnetron sputtering coating technology, resistance evaporation coating technology, CVD coating technol...
The large-scale anti fingerprint coating equipment for high-end sanitary ware is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerpr...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
With the national attention to industrial environmental protection, the water electroplating process is gradually abandoned. At the same time, with the rapid growth of demand in the automotive indu...
The equipment integrates magnetron sputtering and ion coating technology, and provides a solution for improving color consistency, deposition rate and stability of compound composition. According t...
With the rapid growth of mobile phone industry demand, the loading capacity of traditional optical coating machine can not meet this demand. ZHENHUA has launched magnetron sputtering optical coatin...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
This series of equipment uses magnetron targets to convert coating materials into nanometer sized particles, which are deposited on the surface of substrates to form thin films. The rolled film is ...
The equipment is equipped with magnetron sputtering coating system + anti fingerprint coating system + SPEEDFLO closed-loop control. The equipment adopts medium frequency magnetron sputtering techn...
In the vacuum chamber, the coating material is vaporized and deposited on the substrate by using the resistance heating method, so that the surface of the substrate can obtain metal texture and ach...
The anti fingerprint coating equipment adopts the magnetic control coating AF anti fingerprint technology, and the anti fingerprint water drop angle can reach more than 115 °. The film has good hyd...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
With the rapid growth of the market demand for improving the wear resistance, lubrication, corrosion resistance and other properties of hard coatings, cathodic arc magnetic filtration ion coating e...
This coating equipment integrates magnetron sputtering and ion coating technology, providing a solution for improving color consistency, deposition rate and stability of compound composition. Accor...
The cathode of the equipment adopts the dual drive technology of front coil and permanent magnet superposition, and cooperates with the anode layer ion source etching system and three-dimensional m...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The coating line adopts vertical modular structure design and is equipped with multiple access doors, which is convenient for independent installation and maintenance of the cavity, assembly and fu...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...