Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance.
The RF high-frequency generator can generate high-density plasma, activate, etch and ashing the workpiece surface, effectively remove the dust and grease on the product surface, release the surface stress, and obtain various modifications on the workpiece surface.
It is applicable to rubber, glass, ceramic, metal and other products, and is applied to microelectronics, LCD, LED, LCM, PCB circuit board, semiconductor packaging, medical devices, life science experiments and other fields.
VLY1000 | VLY0810 |
φ1000*H1000(mm) | φ800*H1000(mm) |
The equipment integrates magnetron sputtering and ion coating technology, and provides a solution for improving color consistency, deposition rate and stability of compound composition. According t...
The equipment integrates magnetron sputtering and ion coating technology. According to different product requirements, heating system, bias system, ionization system and other devices can be select...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
Magnetron winding coating equipment is to use magnetron sputtering method to change the coating material into gaseous or ionic state in the vacuum environment, and then deposit it on the work-piece...
The anti fingerprint coating equipment adopts the magnetic control coating AF anti fingerprint technology, and the anti fingerprint water drop angle can reach more than 115 °. The film has good hyd...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
The cathode of the equipment adopts the dual drive technology of front coil and permanent magnet superposition, and cooperates with the anode layer ion source etching system and three-dimensional m...
As the current market has higher and higher requirements for the wearability of jewelry, the company has launched special protective film equipment for the jewelry industry. The equipment adopts CV...
The equipment integrates magnetron sputtering and ion coating technology, and provides a solution for improving color consistency, deposition rate and stability of compound composition. According t...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The equipment integrates magnetron sputtering and ion coating technology, providing a solution for improving color consistency, deposition rate and stability of compound composition. According to d...
The equipment integrates magnetron sputtering and ion coating technology, providing a solution for improving color consistency, deposition rate and stability of compound composition. According to d...
The cathode of the equipment adopts the dual drive technology of front coil and permanent magnet superposition, and cooperates with the anode layer ion source etching system and three-dimensional m...
The CF1914 equipment is equipped with medium frequency magnetron sputtering coating system + anode layer ion source + SPEEDFLO closed-loop control + crystal control monitoring system. The medium fr...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
In the vacuum chamber, the coating material is vaporized and deposited on the substrate by using the resistance heating method, so that the surface of the substrate can obtain metal texture and ach...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
The lamp protective film equipment developed by ZHENHUA solves the long-standing problem that PC / ABS lamps need to be sprayed with paint. It allows the injection molded parts of the lamps to dire...
This coating equipment integrates magnetron sputtering and ion coating technology, providing a solution for improving color consistency, deposition rate and stability of compound composition. Accor...
In the vacuum chamber, the coating material is vaporized and deposited on the substrate by using the resistance heating method, so that the surface of the substrate can obtain metal texture and ach...
The equipment is a vertical double door structure. It is a composite equipment integrating DC magnetron sputtering coating technology, resistance evaporation coating technology, CVD coating technol...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
Magnetron winding coating equipment is to use magnetron sputtering method to change the coating material into gaseous or ionic state in the vacuum environment, and then deposit it on the work-piece...
ITO / ISI horizontal continuous coating production line is a large planar magnetron sputtering continuous production equipment, which adopts modular design to facilitate future expansion and upgrad...
The equipment adopts multi arc ion coating technology, which has the advantages of simple operation, fast pumping speed, high efficiency and good process repeatability. It is equipped with a double...
With the national attention to industrial environmental protection, the water electroplating process is gradually abandoned. At the same time, with the rapid growth of demand in the automotive indu...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The equipment integrates magnetron sputtering and resistance evaporation technology, and provides a solution for coating a variety of different substrates. The experimental coating equipment is mai...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
The large-scale anti fingerprint coating equipment for high-end sanitary ware is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerpr...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
The lamp protective film equipment developed by ZHENHUA solves the long-standing problem that PC / ABS lamps need to be sprayed with paint. It allows the injection molded parts of the lamps to dire...
The CF1914 equipment is equipped with medium frequency magnetron sputtering coating system + anode layer ion source + SPEEDFLO closed-loop control + crystal control monitoring system. The medium fr...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
The equipment is a vertical double door structure. It is a composite equipment integrating DC magnetron sputtering coating technology, resistance evaporation coating technology, CVD coating technol...
The CF1914 equipment is equipped with medium frequency magnetron sputtering coating system + anode layer ion source + SPEEDFLO closed-loop control + crystal control monitoring system. The medium fr...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
This coating equipment integrates magnetron sputtering and ion coating technology, providing a solution for improving color consistency, deposition rate and stability of compound composition. Accor...
In the vacuum state, place the workpiece on the cathode of low-pressure glow discharge and inject appropriate gas. At a certain temperature, a coating is obtained on the surface of the workpiece by...
With the national attention to industrial environmental protection, the water electroplating process is gradually abandoned. At the same time, with the rapid growth of demand in the automotive indu...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
The equipment adopts cathode arc ion coating technology and is equipped with advanced IET etching system. After treatment, the product can directly deposit hard coating without transition layer. At...
The equipment is a vertical double door structure. It is a composite equipment integrating DC magnetron sputtering coating technology, resistance evaporation coating technology, CVD coating technol...
The experimental roll to roll coating equipment adopts the coating technology combining magnetron sputtering and cathode arc, which meets the requirements of both film compactness and high ionizati...
This series of equipment converts the coating materials with low melting point and easy to evaporate into nano particles by heating in the medium frequency induction furnace or evaporation molybden...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The equipment is a vertical double door structure. It is a composite equipment integrating DC magnetron sputtering coating technology, resistance evaporation coating technology, CVD coating technol...
The CF1914 equipment is equipped with medium frequency magnetron sputtering coating system + anode layer ion source + SPEEDFLO closed-loop control + crystal control monitoring system. The medium fr...
In the vacuum state, place the workpiece on the cathode of low-pressure glow discharge and inject appropriate gas. At a certain temperature, a coating is obtained on the surface of the workpiece by...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
With the rapid growth of mobile phone industry demand, the loading capacity of traditional optical coating machine can not meet this demand. ZHENHUA has launched magnetron sputtering optical coatin...
The equipment adopts multi arc ion coating technology, which has the advantages of simple operation, fast pumping speed, high efficiency and good process repeatability. It is equipped with a double...
The equipment mainly adopts chemical vapor deposition to prepare oxide film, which has the characteristics of fast deposition rate and high film quality. As for the equipment structure, the double ...
With the national attention to industrial environmental protection, the water electroplating process is gradually abandoned. At the same time, with the rapid growth of demand in the automotive indu...
The equipment adopts multi arc ion coating technology, which has the advantages of simple operation, fast pumping speed, high efficiency and good process repeatability. It is equipped with a double...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The large-scale anti fingerprint coating equipment for high-end sanitary ware is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerpr...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The vacuum coating chamber of the chemical vapor deposition equipment adopts an independent double-layer water-cooling structure, which is efficient and uniform in cooling, and has a safe and stabl...
The equipment integrates magnetron sputtering and resistance evaporation technology, and provides a solution for coating a variety of different substrates. The experimental coating equipment is mai...
The large-scale anti fingerprint coating equipment for high-end sanitary ware is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerpr...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
The coating line adopts modular structure, which can increase the chamber according to the process and efficiency requirements, and can be coated on both sides, which is flexible and convenient. Eq...
The large-scale metal anti fingerprint coating equipment is equipped with cathode arc ion coating system, medium frequency magnetron sputtering coating system and anti fingerprint coating system, w...
The equipment adopts the electron beam evaporation technology. Electrons are emitted from the cathode filament and focused into a certain beam current, which is accelerated by the potential between...
With the rapid growth of mobile phone industry demand, the loading capacity of traditional optical coating machine can not meet this demand. ZHENHUA has launched magnetron sputtering optical coatin...
The cathode of the equipment adopts the dual drive technology of front coil and permanent magnet superposition, and cooperates with the anode layer ion source etching system and three-dimensional m...
The equipment adopts the cathode arc evaporation ion coating technology, which has the characteristics of fast deposition rate, high energy and high metal ionization rate. The cathode arc can be co...
Magnetron winding coating equipment is to use magnetron sputtering method to change the coating material into gaseous or ionic state in the vacuum environment, and then deposit it on the work-piece...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
This series of equipment converts the coating materials with low melting point and easy to evaporate into nano particles by heating in the medium frequency induction furnace or evaporation molybden...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
Vacuum plasma cleaning equipment adopts integrated structure, equipped with RF ion cleaning system, fully automatic control, convenient operation and maintenance. The RF high-frequency generator ca...
This series of equipment uses magnetron targets to convert coating materials into nanometer sized particles, which are deposited on the surface of substrates to form thin films. The rolled film is ...
With the rapid growth of the market demand for improving the wear resistance, lubrication, corrosion resistance and other properties of hard coatings, cathodic arc magnetic filtration ion coating e...